Microphones and earbuds use vibrating diaphragms to convert sound into electrical impulses and back to sound, allowing you to record audio while speaking into your headphones. Although the audio quality of repurposed earbuds is lower than that of purpose-built microphones, it can be marginally enhanced using computer audio settings. In this article, we will discuss how to use headphones as a mic.
The Basics of Using an Earphone Mic
Earphones and microphones both work on the same concept, but they’re both designed to execute a certain task well. As a result, your earphones can be used as microphones, but not as good ones and your microphone cannot be used as a speaker.
Most earphones and earpods have a four-band 3.5mm TRRS connector (with four portions separated by three insulators) that adds an additional audio channel to the stereo output, such as a microphone input; TRRS plugs function well in computers with built-in microphone and earphone ports. To convert a 3.5mm TRRS plug to a three-band 3.5mm microphone input connector on computers with separate microphone and earphone jacks, an external microphone adapter needs to be utilized (with three sections separated by two insulators).
Due to design constraints, you’ll have to talk loudly into your repurposed earphones or earbuds in order for your computer system to pick up sound.
How to Use headphones as a mic on computer
Plug your headphones into the microphone, also known as audio input or line-in, jack on your computer. To launch the Sound control panel, type “manage audio devices” into the search box and click “Manage audio devices” in the results.
On the Sound control panel, click the “Recording” tab. Blowing or tapping your earbuds repeatedly will cause green bars to appear, suggesting that your device is picking up the sounds. Select your makeshift microphone after confirming that it is listed and functional, and then click the “Set Default” button. You can now utilize your headphones or earbuds as a microphone by clicking the “OK” button.
So, To utilize your headphones, you must first plug in your device. Although this is a basic process, remembering the available audio device ports on your computer might be tough. You have the option of connecting the headphone’s cable to a computer port or connecting it wirelessly. Owners of headphones have the following options:
Older headphones are less expensive and have a split wire on one end. The microphone can now be connected to two 3.5mm audio ports. (Pink for the microphone, green headphones).
Due to inbuilt amps and controls, USB-powered headphones give superior experiences. However, there isn’t much of a difference in quality between USB and 3.5mm connectors.
These headphones can be connected to a wireless receiver through Bluetooth or USB. They disconnect all of your computer’s cords, allowing you to sit more easily without having to worry about making a mess.
On a desktop computer, the motherboard and case may have ports at the front. If there isn’t a rear port or the connection isn’t long enough, this could be handy. The sound card put on the motherboard determines the sound quality. A dedicated digital-to-analog converter can be compared to this (DAC).
What is the best way to use headphones and a microphone at the same time?
Headphones with built-in microphones are becoming increasingly important as working from home becomes more common. Some may not be ready to use it right away. To get the settings to work properly, you may need to make some adjustments. This is especially true for computers running Windows 10.
Multiple devices can be configured at the same time, allowing you to tailor sound settings for various occasions. This can lead to your computer misinterpreting which device is being used for certain settings, such as the microphone input.
As a result, your Windows PC may fail to detect your headphones as a default input device. To make your headphone the default device, follow these steps:
Check to see if your devices (wired or wireless) are linked properly.
NOTE: Our instructions will show you how to connect your wired or wireless headphones to your computer.
- In the lower right corner of your screen, click the sound icon. You will have access to the sound options.
- To open the Sound Control Panel (located to the right of Settings), click it.
- Select your headphone as your default input device on the control screen.
Third-party audio apps like Zoom have the potential to override your system choices. Make sure they’re switched off to avoid any possible interference.
How to turn on/off your headset microphone
If your headphones don’t work, it’s possible that your sound settings have disabled them from being set as the default input device.
One of two methods can be used to accomplish this:
If the microphone is currently set as your default input device, use the Device settings to activate or disable it.
Using the Manage sound devices option, you can enable or disable microphones.
Make use of the Device settings
- Open Settings and go to the System tab.
- Select Sound from the drop-down menu. In the Input section, select the Device property option.
- By default, your microphone should be turned on. Drag your cursor to the right on the volume bar to raise the volume, and vice versa to decrease volume.
- To turn the device off/on, clear or check the Disable option. Your PC will no longer be able to access the microphone once you’ve finished this step.
Select Manage sound devices from the drop-down menu
You can use these methods to disable or enable one or more microphones.
- Open Settings and go to the System tab.
- Select Sound from the drop-down menu. In the Input section, select the Manage sound devices option.
- Select the microphone from the Input Devices section.
- Click the Disable/Enable button to disable or enable the device.
- Repeat steps 3 and 4 to disable numerous microphones. Your PC will no longer be able to access the microphones that have been deactivated after you’ve performed the aforementioned procedures.
How to adjust the loudness of the microphone?
On a desktop PC, adjust the volume of the headphone microphone.
Windows PCs’ default microphone settings may not be enough for all users. The loudness of a microphone can be manually adjusted in Windows. When your headphones aren’t working properly but your coworkers can still hear you, this is beneficial.
You can change the volume of your microphone input by following these steps.
- Go to System by clicking the Settings tab.
- The Sound Control Panel can be found by clicking on Sound.
- Select the Recording option from the drop-down menu. Select Microphone and then Properties from the drop-down menu.
- Toggle the Microphone Boost slider by clicking on Levels and dragging the slider. For a louder sound, turn to the right. Moving to a quieter location will allow you to hear fewer sounds.
WARNING: Increasing the volume of your microphone too much can cause distortions.
Troubleshooting issues with Windows headphones Use the proper ports
Are you certain it’s turned on? Is the port you’re using the right one? Depending on the sound card you have, it’s normally green for output and pink for in. If you combine the two, you’ll get nothing.
It’s possible that auto-detection is no longer available. OEM software could be to blame for this. If you disable jack detection using software, see if that helps.
It’s possible that your gadget isn’t working because of the drivers. Remove the drivers for your headphones from Device Manager. Please restart your computer and reconnect your headphones so that Windows can reinstall them. It’s the tried-and-true way of turning it on and off, but it works.
Choose from a variety of formats
If you’re still having problems, switch to a different input/output type in the property window.
Depending on the manufacturer and type, the cable may feature controls. Here you’ll find volume sliders and mute controls. Make sure they’re ready to use, though.
Note: You could try using a new headset, device, or earbud.
You can use the headset on another device or PC to see if the problem is caused by the headphone or your computer. You could try plugging in an earbud if you already have one.
We have mentioned every detail of how to use headphones as a mic in the above-mentioned article. I hope it will be helpful for you all.